3D device

Moderator: Moderators

Post Reply
Ulawun
Posts: 67
https://www.behance.net/kuchnie-warszawa
Joined: Fri Apr 08, 2005 9:25 pm
Location: Boston, MA

3D device

Post by Ulawun »

Okay, so i got my internet connection back up and running but now i cannot log onto EQ. Says my 3D device cannot be found, anyone out there know how to fix this? :?
User avatar
Laleldil
Posts: 678
Joined: Sat Apr 17, 2004 6:13 pm
Location: Southwest corner of Michigan

Post by Laleldil »

not sure how this all works but appears you may need to reinstall your graphics card driver... now if I could get the screen centered and the mouse to work I could possibly play again
http://www.magelo.com/eq_view_profile.html?num=998304

http://www.magelo.com/eq_view_profile.html?num=1313487


Baking 300 + Maxed Trophy; Brewing 300 + Maxed Trophy; Fletching 300 6/7 Trophy; JC 300 6/7 Trophy; Pottery 300 6/7 Trophy; Smithing 300 6/7 Trophy; Tailoring 300 Maxed Trophy
User avatar
EggbornHatchedrotten
Member
Posts: 3397
Joined: Thu Nov 03, 2005 2:15 am

Post by EggbornHatchedrotten »

http://help.station.sony.com/cgi-bin/so ... _topview=1

See if that link from hell works hehe
User avatar
Chakkorisi
Member
Posts: 1193
Joined: Fri Nov 04, 2005 3:08 am

Post by Chakkorisi »

Go to START -> RUN and then type in "dxdiag" (minus the quotes). This will run the DirectX diagnostic utility.

If there are no 3D drivers established for your video card, this will assist in setting them up.

Chakk
Ulawun
Posts: 67
Joined: Fri Apr 08, 2005 9:25 pm
Location: Boston, MA

Post by Ulawun »

Thanks for your help everyone. Got it running and good to go.
Post Reply